POWEC PCU10.24-48D Power Conversion Unit Product Features and Precautions Features.
Input and output specifications: The “10.24-48D” in the module's model number may indicate that it is capable of converting an input DC voltage (most likely 10.24V DC from a battery or solar system) to a 48V DC output, and the “D” may indicate a direct current (DC) output.
Applications: Suitable for systems that rely on non-standard DC voltages or need to step up from a lower voltage to a higher voltage level, commonly found in mobile or off-grid power systems, telecommunication base stations, electric vehicle charging systems, and some industrial automation equipment.
Design Purpose: This design allows equipment to obtain a stable DC power supply even when not directly connected to the power grid (alternating current AC), and is suitable for field operations, remote areas, or sites that require a highly reliable and independent power supply.
Possible features: These include high efficiency conversion, wide range input voltage adaptability, overload protection, short circuit protection, and possible temperature compensation and cooling mechanisms to ensure stable operation under different environmental conditions.
Manufacturer and Service: Although specific manufacturer information is not provided in detail, these products are generally produced by specialized power electronics companies and may be accompanied by appropriate technical support and after-sales service.
Voltage Matching: Make sure the input power supply voltage (10.24V DC) matches the equipment requirements, and make sure the output 48V DC is suitable for the connected loads to avoid damage caused by voltage loop matching.
Correct polarity: When connecting the power cord and load, make sure the positive and negative polarity are correct, incorrect polarity connection may cause damage to the power module or load.
Environmental conditions: Ensure that the environment is dry and well ventilated, avoid high temperature, humidity or dusty places, which may affect the performance and life of the power module.
Heat Dissipation: Check the thermal design of the module to ensure that there is sufficient space for air circulation around the module, and if necessary, install additional heat dissipation facilities to maintain normal operating temperature.
Overload Protection: Understand and observe the module's maximum output power limitations to avoid prolonged overload operation, which may result in overheating or damage to the module.
Regular Maintenance: Regularly check that power module connections are tight, clean module surfaces, and ensure that ventilation holes are not blocked.
Electrical isolation: Always disconnect the power supply before performing any maintenance or replacement operations to ensure safety.
Professional Installation: It is recommended that the installation and maintenance be carried out by professionals with appropriate electrical knowledge, as non-professional operation may violate safety regulations.
Labeling and Records: Appropriate labeling of all connected cables to facilitate subsequent maintenance and troubleshooting, while keeping good records of equipment use and maintenance logs.
Please contact customer service for favorable price and delivery date [plcdcs-module@foxmail.com]
More products Please click her
This article is from the official website of Xiamen Xiongba, please include the following link for reproduction：www.plcdcsmodule.com |POWEC PCU10.24-48D Power conversion unit
3005319639