ABB PFCA401 3BSE024387R4 Millmate 400 controller unit

ABB PFCA401 3BSE024387R4 Millmate 400 controller unit

Millmate Controller 400 it is a device designed to offer a lot of functionalities while being user-friendly. It covers most mechanical arrangements, and the user only has to follow the step-by-step instructions to set up the controller and calculate the correct strip tension. This device is suitable for industries that require precise tension control, such as paper, foil, and steel production.

On the other hand, FPC401 is a quad port controller that serves as a low-speed signal aggregator for common port types such as SFP+, QSFP+, and SAS. It aggregates all low-speed control and I2C signals across four ports and presents a single easy-to-use management interface to the host (I2C or SPI). Multiple FPC401s can be used in high-port-count applications with one common control interface to the host. The FPC401 is designed to allow placement on the bottom side of the PCB, underneath the press fit connector, to simplify routing. This localized control of the ports’ low-speed signals cuts system BOM cost by enabling the use of smaller IO count control devices (FPGAs, CPLDs, MCUs) and by reducing routing layer congestion. 

                    ABB PFCA401 3BSE024387R4 Millmate 400 controller unit

The control unit has a variety of built-in mechanical mounting modes. This means that the user can set up the control unit and perform the correct strip tension calculation simply by following the step-by-step menu operations.

Some built-in features:

Easy installation

- Industrial grade electronics with operating temperatures up to 70°C

- EMC-compliant, no additional housing required

- Easy access with pluggable screw end rows on the bottom of the control unit

- Built-in grounding points for cable shielding

- Supply voltage 100 - 240 V AC

Easy commissioning

- Control unit set-up according to step-by-step menu

- Predefined standard measurement modes

- Easily configurable analog/digital input/output ports

- Threshold determination

- Unit selection (N, kN, MN, kp, t, lb, T)

- Simulation function to easily check system integration

Easy maintenance/monitoring

- Self-diagnostic test system, which includes sensor testing

- Import and export of setup parameters via PC

- Network connection for remote access

This article is from the official website of Xiamen Xiongba, please include the following link for reproduction：www.plcdcsmodule.com | E-mail:plcdcs-module@foxmail.com | ABB PFCA401 3BSE024387R4 Millmate 400 controller unit